Non-Destructive Testing (NDT) is basic to guaranteeing that defects in welds are identified on a sequential construction system preceding being put to utilize. That is the place NDT assumes an imperative job. It can distinguish both surface and sub-surface Read more…
There is much doubt on this topic PTO and PWM. The Engineers using μ -controllers refer to Pulse Width Modulation regardless, if it is PTO or PWM. For PLCs it is important to know the difference. The automation training Read more…
A temperature transmitter is a device that connects a temperature sensor to transmit the signal for monitoring and control purposes. Typically, the temperature sensor is either RTD, Thermistor or Thermocouple type sensor and will interface with a PLC, DCS. Temperature Read more…
Introduction to I2C Communication I2C combines the best features of SPI and UARTs. With I2C, you can connect multiple slaves to a single master (like SPI) and you can have multiple masters controlling single, or multiple slaves. This is really useful Read more…
The hot stamping of the polymer was studied to improve product quality. The finite element method (FEM) was used to analyze the embossing step, as per the product quality we can take the steps cooling and demolding. The numerical simulation Read more…
What do we Mean by ‘Intelligent Lightning’? In the conventional lighting system a system where every light has a manual switch or dimmer that you must operate directly, but in the ‘Intelligent lighting’ can be as simple as automating a Read more…
Introduction Embossing is a stamping process for producing raised or sunken designs in sheet, metal, leather, etc. This process can be made by means of matched two dies like male and female, or by passing sheet or a strip of Read more…
Internet of Things (IoT) is the system of different objects that are connected and accessible through the internet. ‘Thing’ in IoT could be a person with a body monitoring or vehicle automation with built-in-sensors, i.e. objects that are given with Read more…
A safety programmable logic controller (PLC) is same as like a standard PLC. It is mostly used to control and automate pieces of industrial equipment. A safety PLC also supports all the applications that a standard PLC does; however, a safety PLC consist of integrated safety functions that allow Read more…
Factory automation infrastructure is a newly coined term that is mainly used to group every product, procedure, buildings, networks, controllers, interfaces, machinery, and assembly lines that are involved in organizational structures and facilities used in the production of goods. It Read more…