Skip to content
IPCS Global
June 13, 2019
Manufacturers have driven continuous improvement and quality management programs in manufacturing industries. This includes lean, six sigma or Overall equipment effectiveness(OEE) methodologies. Lean manufacturing results in a net improvement in total productivity. It is a series of methods designed to Read more…
IPCS Global
March 28, 2019
IoT using IPCS NodeMCU Training Board NodeMCU is a low-cost open source IoT platform. It has firmware which runs on the inbuilt ESP8266 Wi-Fi module from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” Read more…
IPCS Global
February 19, 2019
The definition of SCADA is ‘Supervisory Control and Data Acquisition’. SCADA refers to a system that collects data from various sensors at a factory, plant or in other remote locations and then sends this data to a central computer which Read more…
IPCS Global
February 19, 2019
BEAGLEBONE Beaglebone is a single board computer (SBC) which was developed by Texas Instruments in 2013. Beaglebone is designed with open source software and it consumes low power. Beagle bone is designed with all basic functionality of the computer. Specification: Read more…
IPCS Global
January 17, 2019
Smart Irrigation System with IoT Based Monitoring The proposed system is a smart irrigation system, which uses the latest IOT technology for monitoring the parameters of the irrigation field. The main circuit of this project uses an Arduino Uno Read more…
IPCS Global
September 20, 2018
IoT: The Future Technology Introduction What is the Internet of Things? IoT is the giant network of systems which are connected to the internet. They can exchange data over a network without manual assistance or intervention, making opportunities for more Read more…
IPCS Global
September 20, 2018
Preparation: Switch off all related electricity source first. Attention: The power input L, N cables must connect with the “INPUT” side. The electricity output L N cables must connect with “OUTPUT” side. Remember DON`T mistaken the directions! When connect Sonoff Read more…
Address
123 Main Street
New York, NY 10001
Hours
Monday—Friday: 9:00AM–5:00PM
Saturday & Sunday: 11:00AM–3:00PM
This may be a good place to introduce yourself and your site or include some credits.
Address
123 Main Street
New York, NY 10001
Hours
Monday—Friday: 9:00AM–5:00PM
Saturday & Sunday: 11:00AM–3:00PM
This may be a good place to introduce yourself and your site or include some credits.
Automation Training
Our foundation-to-advanced automation course training covers end-to-end industrial workflows used in modern plants. Learners practice the full cycle from basic circuits to commissioning and maintenance with hands-on labs, project-based fault finding, SOP creation, and documentation exposure (URS, FDS, FAT/SAT).
PLC Training
This PLC training builds controller fundamentals with ladder, FBD, and ST, including I/O wiring, PID tuning, diagnostics, and version control practices on live rigs.
SCADA Training
Our SCADA course covers tag databases, HMI graphics, historian/trends, alarm rationalization, redundancy, user security, backups, and deployment aligned to plant standards.
Panel Designing
This panel design course teaches standards-compliant MCC/PLC panel engineering, SLD/GA/wiring docs, device selection, heat-load, testing, and FAT.
BMS & Security
BMS training focuses on HVAC/lighting/utilities automation; CCTV & security covers design, storage, networking, and analytics.
IIoT
The Industrial IoT diploma spans sensors-to-dashboard pipelines: MQTT/OPC UA, gateways, historians, alerts/KPIs, and predictive maintenance basics.
Locations:
Mumbai (Vashi),
Pune (Chinchwad),
Maharashtra,
Kolkata,
West Bengal,
Madhya Pradesh,
Chhattisgarh,
Jharkhand,
Hyderabad (Ameerpet),
Bangalore (JP Nagar),
Mysore (Vijayanagar 2nd Stage),
Karnataka,
Chennai (Anna Nagar West Extn),
Tambaram (West Tambaram),
Tamil Nadu,
Tiruchirappalli (Chatram),
Erode,
Madurai (K. Pudur),
Tirunelveli (Vasanth Nagar),
Coimbatore (Hope College),
Palakkad (Sultanpet),
Pathanamthitta (Chittoor),
Kottayam,
Malappuram (Perinthalmanna),
Thrissur (Keerankulangara),
Kannur (Thana),
Kollam (Chinnakada),
Thiruvananthapuram (Thampanoor),
Kozhikode (Mavoor Rd Jn),
Kochi (Kaloor)
