Skip to content
IPCS Global
November 21, 2019
In this day and age, technology provides powerful protection for an affordable price. If you are serious about keeping your home safe, a fence, locks, and cameras aren’t going to cut it. To truly protect your property, invest in a Read more…
IPCS Global
March 31, 2019
Three phase induction motor is driven by AC supply. Because of low cost and more efficient, in industrial area, this motor is majorly used. It achieves High efficiency and reliable, Maintenance is not much needed, Compare than other Ac motors, Read more…
IPCS Global
February 19, 2019
The definition of SCADA is ‘Supervisory Control and Data Acquisition’. SCADA refers to a system that collects data from various sensors at a factory, plant or in other remote locations and then sends this data to a central computer which Read more…
IPCS Global
February 19, 2019
BEAGLEBONE Beaglebone is a single board computer (SBC) which was developed by Texas Instruments in 2013. Beaglebone is designed with open source software and it consumes low power. Beagle bone is designed with all basic functionality of the computer. Specification: Read more…
IPCS Global
December 17, 2018
Singlecue Gen 1 – Smart home control NEW YORK, NY–(Marketwired – Oct 18, 2016) – eyeSight Technologies, Designed as a simple solution to controlling home devices through gestures, the new generation of singlecue introduces more intuitive control and creates an Read more…
IPCS Global
September 20, 2018
Turn electronics on or off from anywhere with your smartphones and tablets Wi-Fi enabled Smart Switch is a wireless outlet switch that can be used to turned on or off the plugged electronics through smartphones and tablets. The Smart Switch Read more…
IPCS Global
September 20, 2018
Preparation: Switch off all related electricity source first. Attention: The power input L, N cables must connect with the “INPUT” side. The electricity output L N cables must connect with “OUTPUT” side. Remember DON`T mistaken the directions! When connect Sonoff Read more…
Address
123 Main Street
New York, NY 10001
Hours
Monday—Friday: 9:00AM–5:00PM
Saturday & Sunday: 11:00AM–3:00PM
This may be a good place to introduce yourself and your site or include some credits.
Address
123 Main Street
New York, NY 10001
Hours
Monday—Friday: 9:00AM–5:00PM
Saturday & Sunday: 11:00AM–3:00PM
This may be a good place to introduce yourself and your site or include some credits.
Automation Training
Our foundation-to-advanced automation course training covers end-to-end industrial workflows used in modern plants. Learners practice the full cycle from basic circuits to commissioning and maintenance with hands-on labs, project-based fault finding, SOP creation, and documentation exposure (URS, FDS, FAT/SAT).
PLC Training
This PLC training builds controller fundamentals with ladder, FBD, and ST, including I/O wiring, PID tuning, diagnostics, and version control practices on live rigs.
SCADA Training
Our SCADA course covers tag databases, HMI graphics, historian/trends, alarm rationalization, redundancy, user security, backups, and deployment aligned to plant standards.
Panel Designing
This panel design course teaches standards-compliant MCC/PLC panel engineering, SLD/GA/wiring docs, device selection, heat-load, testing, and FAT.
BMS & Security
BMS training focuses on HVAC/lighting/utilities automation; CCTV & security covers design, storage, networking, and analytics.
IIoT
The Industrial IoT diploma spans sensors-to-dashboard pipelines: MQTT/OPC UA, gateways, historians, alerts/KPIs, and predictive maintenance basics.
Locations:
Mumbai (Vashi),
Pune (Chinchwad),
Maharashtra,
Kolkata,
West Bengal,
Madhya Pradesh,
Chhattisgarh,
Jharkhand,
Hyderabad (Ameerpet),
Bangalore (JP Nagar),
Mysore (Vijayanagar 2nd Stage),
Karnataka,
Chennai (Anna Nagar West Extn),
Tambaram (West Tambaram),
Tamil Nadu,
Tiruchirappalli (Chatram),
Erode,
Madurai (K. Pudur),
Tirunelveli (Vasanth Nagar),
Coimbatore (Hope College),
Palakkad (Sultanpet),
Pathanamthitta (Chittoor),
Kottayam,
Malappuram (Perinthalmanna),
Thrissur (Keerankulangara),
Kannur (Thana),
Kollam (Chinnakada),
Thiruvananthapuram (Thampanoor),
Kozhikode (Mavoor Rd Jn),
Kochi (Kaloor)
