Training Courses (Automation, PLC, SCADA, BMS, CCTV Security Systems)

Category_NDT_EN_desktop
Shadow

Capitalizing on its long-term industrial experience in Automation sector, IPCS conducts various training programs specially tailored for Professionals, Corporate Companies and Colleges. More info tragamonedas cleopatra. People could gamble on the net through best payout casino online. IPCS provides a well-disposed and stimulating study environment addressing the intellectual, professional and leader development of students. Our training programs provide the best practice in the latest technologies, trends and challenges in the immensely competitive areas of automation and embedded technologies, Courses Automation Training, PLC Training, BMS Training, CCTV Training, SCADA Training

Automation System Engineer Duration : 240 Hrs
PLC, PAC, SCADA, DCS, VFD, HMI, Control Panel Designing, Calibration & Testing, Field Instrumentation & Pneumatics Training

Automation System Engineer

The training program is broadly divided into seven sessions. Each session is taken by experts with industry experience. As the world of automation is expanding day by day, Engineers can’t survive without proper training from basic to advanced level. We have developed our syllabus to become our trained engineers an industry ready professional. Thus we have developed our training program to equip participants develop cost effective design with industrial standards.

Enroll NowView Syllabus

Advanced Automation System Professional Duration – 150 hrs
PLC, SCADA, VFD, HMI, Control Panel Designing, Calibration & Testing, Field Instrumentation & Pneumatics Training

Automation System Professional

The training program is broadly divided into six sessions. Each session is taken by experts with industry experience. As the world of automation is intensifying as each day progresses, engineers can’t survive without proper training from the ground level to the advanced level. Our course is highly practical-oriented, aimed at supporting and encouraging fresh engineers to foray into the automation industry and fine tune each engineer personnel.

Enroll NowView Syllabus

Advanced PLC Program Professional Duration – 60 hrs
PLC, SCADA, VFD, Electrical Control Panel Designing Training

Advanced PLC Program Professional

PLC ( PROGRAMMABLE LOGIC CONTROLLER ) is an industrial computer control system that continuously monitors the state of input devices and makes decisions based upon a custom program to control the state of output devices. Almost any production line, machine function, or process can be greatly enhanced using PLC based systems. PLCs can be programmed to perform set of tasks under real-time constraints with superior reliability and performance. Ladder Logic is the most commonly used PLC programming language. IPCS Automation offers PLC training program for long years. IPCS PLC training program is specially tailored for Professionals, Corporate Companies and Colleges.

Enroll NowView Syllabus

DCS Engineering & Maintenance Duration – 30 hrs
Yokogawa Centum CS 3000 DCS Training

DCS Engineering & Maintenance

Distributed Control Systems are used for complex loop controls in process industries. Here the control function is distributed among different controllers. DCS system can handle thousands of I/O in digital and analog formats. They also provide more redundancy to the plant control.

Enroll NowView Syllabus

Electrical Control & Panel Designing Duration – 60 hrs
Yokogawa Centum CS 3000 DCS Training

Electrical Control & Panel Designing

ELECTRICAL CONTROL PANELS DESIGNING are the brain center for all industrial automation projects and represent a vital element in the proper working and performance of these systems. Control panels are most often equipped with push buttons, analog instruments, Monitoring devices Controllers and other accessories to control and monitor field devices. IPCS Automation offers Electrical Control Panels Designing program for long years. IPCS Electrical Control Panels Designing program is specially tailored for Professionals, Corporate Companies and Colleges.

Enroll NowView Syllabus

Industrial Networking Duration – 30 hrs
Industrial Electrical Controls Design and Installation, Modbus, Profibus Training

Industrial Networking

This course covers the standard networking devices and protocols in industry. Networking of PLCs is commonly used in Industries for controlling multiple processes. Participants get maximum practical exposure to networking devices and configuration of custom networks.

Enroll NowView Syllabus

Diploma in Marine Automation Systems Duration – 240 hrs
Marine Automation Training

Marine Automation Training
The training program is broadly divided into major sessions. Each session is taken by experts with marine experience. Thus we have developed our training program to equip participants develop cost effective design with marine standards. Practical electrical knowledge has traditionally been a weak area for most marine engineers. This program has been specifically developed to fill this acutely felt training need. Covering advanced aspects of shipboard electrical knowledge, this workshop, conducted in a dedicated laboratory, provides theoretical information and intensive hands-on training The participant is exposed to intensive practical training, both, in actually wiring up several types of starters and also in troubleshooting faults induced in them.

Enroll NowView Syllabus

VFD Installation Professional Duration – 30 hrs

VFD Installation Professional
Today Conventional motor starters are replaced by energy efficient Variable Frequency Drives. Variable Frequency Drives can provide maximum starting torque without causing complaint to motor winding’s. The course contents are

Enroll NowView Syllabus

Certified Embedded Design Professional Duration – 140 hrs
PIC Micro controllers, Embedded C Programming, AVR, RTOS, GSM, GPS, ARM Processors & Robotics Training

Embedded Design Professional
Our training is aimed at engineers practicing embedded software as well as those planning to enter the embedded field. The training presents practical sessions and techniques for use in designing, implementing, integrating, and testing of modern embedded systems. After successfully completing the training, the participant will be proficient in handling Embedded Projects independently.

Enroll NowView Syllabus

Embedded System Design (Crash) Duration – 30 hrs
PIC Microcontrollers, Embedded C Programming, GPS, ARM Processors & Robotics Training

Embedded Training
Our training is aimed at engineers practicing embedded software as well as those planning to enter the embedded field. The training presents practical sessions and techniques for use in designing, implementing, integrating, and testing of modern embedded systems. After successfully completing the training, the participant will be proficient in handling Embedded Projects independently.

Enroll NowView Syllabus

Auto CAD and Eplan Duration – 30 hrs
Auto CAD and Eplan Training

Auto CAD and Eplan Training
The training presents practical sessions and techniques for use in designing, implementing, integrating, and testing of modern embedded systems. After successfully completing the training, the participant will be proficient in handling Embedded Projects independently.

Enroll NowView Syllabus

Dipolma in Building Management Systems Duration – 6 Months (360 hrs)
BMS Controllers CCTV, Fire Alarms, Security Systems, Access Controls, ;PLC, SCADA, HVAC, Networking, Digital Systems & Lighting Controls CAD Design Training

Building Management Systems Training
The world is becoming smarter and greener by the implementation of high end automation systems. Building Management Systems leads to more optimized control of resources, high end security and ease of access from anywhere. The internet of things initiated by big technology ventures will create a smart world which can be controlled by just a click. The industry is looking for skilled technicians who can meet all the requirements in BMS sector. IPCS CERTIFIED BMS TECHNICIAN training program is a golden opportunity to enhance your employability in home automation and BMS sector.

Enroll NowView Syllabus

Certified BMS Engineer (CBE) Duration – 3 Months (240 hrs)
BMS Controllers CCTV, Fire Alarms, Security Systems, Access Controls, PLC, SCADA, HVAC, Lighting Controls Training

BMS Engineer Training
The tremendous growth in construction industry lead to more optimized controls and energy saving practices. The world is becoming smarter and greener by the implementation of high end automation systems. The industry is looking for skilled engineers who can meet all the requirements in BMS sector. IPCS CERTIFIED BMS ENGINEER training program is a golden opportunity to enhance your employability in home automation and BMS sector. This golden opportunity and assure your job in ever growing automation industry. Detailed syllabus is as follows.

Enroll NowView Syllabus

CCTV & Security Systems Duration – 90 hrs
CCTV, Security Systems, Access Controls Training

CCTV & Security Systems
Building Management Systems leads to more optimized control of resources, high end security and ease of access from anywhere. The internet of things initiated by big technology ventures will create a smart world which can be controlled by just a click. The industry is looking for skilled CCTV technicians. IPCS CERTIFIED CCTV & Security System training program is a golden opportunity to enhance your employability in home, Office & Building Automation.

Enroll NowView Syllabus

Summary
Review Date
Reviewed Item
Automation PLC SCADA CCTV & Security Systems BMS Training Courses
Author Rating
51star1star1star1star1star