Every human in the modern world surely goes for quality. The reputation of every brand is based on the quality of their product. So, in every industry, there is an experienced wing for the quality management team. The Quality of a finished product will only get measured by means of testing. NDT is one of the most important and regular testing methods to visualize the defects of a product for further rectification. Here comes the importance of NDT courses.
Non-Destructive Testing is one of the important portions of Quality Control. NDT is an analysis technique used in industry to evaluate the defects and properties of a material, component, system or a product without causing any damage. NDT can easily recognize the defect that we will never get in noticed with a naked eye and the defect under the covering layer of paint or some other coating.
NDT is one of the oldest techniques with advanced integration of highly precise technologies. So, experience and precise knowledge in this sector will enhance the skill level of engineers and they will get placed in a reputed company without any doubt. Experience and knowledge in NDT should be gained in detail by taking training in a reputed training centre. “NDT” it generally consists of five main techniques, & each technique has level II and level III certification. This certification is mandatory for a company to hire an apt graduate.
As much as the number of companies increases that much is the requirement of the Quality and NDT Specialist. Even though in a small firm the QA/QC department is mandatory.
So, NDT courses are the hopeful area that one can prefer for your better future.
CERTIFIED TRAINING PROGRAMS
NDT Course – Duration : 180 Hours
Introduction:
- What is NDT?
- Codes and Standards
- NDT Qualification and Certification
- Introduction and Fundamentals to destructive and non-destructive testing.
- Scope and limitations of NDT
- NDT and NDE Methods
- Skills and Responsibilities
NDT Techniques
- Visual Testing
- Penetrant Testing
- Magnet Particle Testing
- Ultrasonic Testing
- Radiographic Testing & Film Interpretation
Visual Inspection
- Visual examination methods
- Mechanical and Optical Aids Used in VT
- Test Parameters
- Surface Preparation
- Inspection carried out Before,During and After Welding
- Types of Weld Defects
- Gauges used for weld Inspection
- Record and Documentation
Ultrasonic Testing:
- Basic principles of sound propagation
- Types of sound waves
- Principles of UT
- Methods of UT
- Advantages and limitations
- Piezoelectric Material
- Various types of transducers / probe
- Calibration Methods
- Use of standard blocks
- Technique for normal beam inspection
- Flaw Characterization technique
- Defects in welded products by UT
- Thickness determination by ultrasonic method
- Study of A,B and C scan presentations
Liquid Penetrant Testing(LPT)
- Dye penetrant Testing / Liquid Penetrant Testing
- Principle
- Procedure
- Types of LPT
- Characteristics of Penetrant
- Types of Penetrant
- Types of Developer
- Characteristics of developer
- Penetrant Testing materials
- Application
- Merits and limitations
Magnetic Particle Testing (MPT)
- Important Terminologies related to magnetic properties of material
- Principle
- Procedure
- Magnetizing Technique
- Magnetizing Equipment
- Demagnetization Techniques
- Calibration
- Types of MPT
- Documentation and Record
- Application and limitations
Radiographic testing:
- Types of radiography
- Methods of generation
- Equipment’s Used
- Industrial radiography techniques
- Inspection techniques
- Applications & limitations
- Types of films screens and penetrometers
- Interpretation of radiographs
- Safety in industrial radiography
On-Site Visit