BMS Training Institute Africa

Category_NDT_EN_desktop
Shadow

IPCS was established with the vision of providing automation training and to create proficient engineers. Institute is IPCS strives to impart quality training and an excellent career start to all its trainees. IPCS is providing Diploma in Building Management Systems (DBMS)   Certified Building Management Systems (CBMS) and CCTV & security system. Individual training for each & every student is the reason why our students are the best in the industry.

The objective of Building Management Systems is to manage the subsystems within a building to ensure a pleasant, controlled and safe environment. A BMS Systems can control all or some of the following in a building HVAC, CCTV, Access Control, Fire and Intruder Alarms, Video Door Phone, Lighting and even Power Consumption. Building Management Systems (BMS) also known as Building Automation Systems (BAS), Building Management and Control System (BMCS), Direct Digital Controls (DDC), Intelligent Building and Building Controls etc. Our programs are affiliated to IAO USA, TUV Rhineland, STED, BSS & Government of Qatar.

Certified BMS Engineer (CBE) TRAINING SPECIFICATIONS :

Certified BMS Engineer (CBE) Duration – 3 Months (240 hrs)
Fundamentals of Building Management System
  • Basic Design Criteria
  • Components Used in BMS
  • Concept of Green & Smart Design
  • Energy Management Systems
  • MEP Design Fundamentals
Basic Electronics
  • Basic Rules – OHMS Law, Faradays Law, KCL, KVL
  • Passive Components
  • Active Components
  • Power Electronics Components
  • Familiarization of Tools – Multimeter, Soldering, Desoldering
  • Selection of Components and Color Codes
Digital Circuits
  • Number Systems & Conversion
  • Binary Operations
  • Logic Gates
  • Universal Gates
  • 555 Timer
Micro controllers
  • Microprocessors & Micro Controllers
  • Architecture
  • Programming Practice
  • IC Burning
  • Interfacing Keyboard, LCD, Stepper Motor, LED Displays
Basic Electrical Engineering
  • Single Phase and Three Phase Systems
  • Different Types Loads – Load Calculation
  • Measurement of Current, Voltage, Power
  • Different Types of Motors
  • Different Types of Earthing
Relay Logic Systems
  • Basic of Relays, Contractors, Timers, OLR, MCCBB, ACB
  • Digital Timers, Counters
  • Motor Control Circuits – D.O.L, Star, Delta
  • Implementation of Fire Alarm Logic
Control Panels
  • Different Types of Panels
  • Panel Components
  • Wiring and Trouble Shooting
  • AMF Panels
  • APFC Panels
  • Power Management Systems
Servo Drives
  • Basics of Motor – DC Motor, Stepper, Servo
  • Feedback System
  • Speed Control
  • Torque Control
  • Selection of Servo Motor and Drives
  • Programming of Motor Drives
  • Interfacing with PLC, HMI
VFD’s
  • Selection of VFD’s
  • Programming of VFD
  • Fault Correction
  • Interfacing with HMI, PLC
CAD Drawing
  • Single Line Diagram
  • Standard Symbols
  • MEP Design Concepts
  • Plotting
  • Interfacing with HMI, PLC
Networking
  • Concept of LAN, VAN
  • Implementing of Networks
  • Sharing of Files, Printers, Scanners Etc.
  • Network Protocols – TCP/IP, Ethernet, Modbus, Canbus, Profibus
CCTV – Honeywell & Hikvision
  • Selection of Camera
  • Cabling and Termination
  • Different Types of Cameras
  • Night Vision Systems
  • DVR Configuration – Honeywell
  • NVR Configuration – Hikvision
  • IP Cameras and Networking
  • Remote Monitoring Through Phone and Internet
Security Systems – Intruder Alarms
  • GSM Enabled Control Panel
  • PIR Sensors
  • Vibration Sensors
  • Gas Leakage Detectors
  • EM Locks
  • Beam Sensors
Biometric Access Control – Honeywell
  • RFID Cards
  • Installation and Configuration
  • Finger Print Access
  • Report Preparation
  • Magnetic Locks
Fire Alarms & Panels – Honeywell
  • Sensors – Heat, Smoke, PIR
  • Conventional Fire Alarm Panels
  • Addressable Fire Alarm Panels
  • Cabling
  • Safety Standards
  • Alarms
  • PA Systems
  • Recorders
BMS Configuration
  • Basic Parameters
  • Energy Measurement
  • Transmission Techniques
  • Network Protocols – Modbus, Profibus, Canbus
PLC
  • Monitoring the Process Through Sensors – Connection Details
  • Analog Addressing, Continuous Process Monitoring and Control
  • NO/NC Concept
  • Data File Handling – Forcing I/O
  • Wiring and Fault Correction
  • Programming Practices
HMI
  • HMI System Overview
  • HMI Hardware Overview
  • Operation of Standard Display Panels
  • Display Panels – Textual and Graphical
  • Communication with PLC and Drives
SCADA
  • SCADA Packages
  • Role of SCADA in Industrial Automation
  • Script Programming
  • Real Time and Historical Trend
  • Configuring Alarms
  • Real Time Project Development with PLC Interfacing
  • Communication with Other Software
  • Recipe Management
  • Accessing Different Security Levels
  • Report Generation of Current Plant
Field Instruments
  • Common Instrumentation Parameters – Set point, Measured Variable, Manipulated
  • Variable, Error, Zero & Span, Hysteresis, Accuracy
  • Measurement of Level, Temperature, Pressure, Flow
  • Calibration of Transmitters
Pneumatics & Hydraulics
  • Pneumatic Cylinders, Valves, Positioned
  • Control Valves
  • Calibration
  • I/P Converter
Video Door Phones
Lighting Controls
Solar Panels
UPS and Generators
Surge & Lightning Protection Systems
Automatic Gates & Barriers
HVAC Systems
RTU
Interview Training
Aptitude Test
Group Discussion