While buying a CCTV camera one has to look out for various features. Some of the important ones are:-
Night Vision:– This is an important feature to capture images even at night. With a night vision feature in your camera you can clearly watch out for thieves even in the dark.
High Definition: –A CCTV camera should be able to produce images and videos in 720 p and 1080 p resolution. Greater the resolution, better the quality of images.
Pan/Tilt:- This is another important feature in your camera which helps you to have a 360 degrees view of your surroundings.
Motion Detection: – This helps in detecting an unusual action happening in your house or office in your absence. Motion detection also sets up an alarm and sends you signal through your phone.
Weatherproof: – If you are setting up an outdoor camera then it has to be weather and waterproof.
In-build SD card: – In-build SDcard is highly recommended so that all the images and videos can be stored for future reference.
Set up and Warranty: – After buying a camera the most important step is installing the camera. Look out for instructions on manual or YouTube Most of the companies provide this service, while others leave the job in your hands.
#1. D3D Wireless HD IP Wifi CCTV Indoor Security Camera
Features:
Night Vision
2-Way Audio Support
1 Year Warranty
Clear HD Picture
128 Micro SD Card
Slim Look
Good Customer Care Service
#2. Hikvision DS-2CE16D0T-IRP IR Night Vision Bullet Camera
Features:
Effective Pixels — 1920 (H) * 1080 (V)
Bullet camera 1 Pcs
High Quality Branded and Trusted Product.
#3. Sricam SP Series SP005 Indoor Security Camera
Features:
720P HD, 355 degree horizontal pan and 90 degree tilt
In-built microphone and speaker
Supports up to 128 GB micro SD card.
Mobile application efficient
#4. Sricam SP007 Wireless Waterproof Wi-Fi HD 720P Outdoor Security Camera
This may be a good place to introduce yourself and your site or include some credits.
Search
Automation Training
Our foundation-to-advanced automation course training covers end-to-end industrial workflows used in modern plants. Learners practice the full cycle from basic circuits to commissioning and maintenance with hands-on labs, project-based fault finding, SOP creation, and documentation exposure (URS, FDS, FAT/SAT).
PLC Training
This PLC training builds controller fundamentals with ladder, FBD, and ST, including I/O wiring, PID tuning, diagnostics, and version control practices on live rigs.
SCADA Training
Our SCADA course covers tag databases, HMI graphics, historian/trends, alarm rationalization, redundancy, user security, backups, and deployment aligned to plant standards.
Panel Designing
This panel design course teaches standards-compliant MCC/PLC panel engineering, SLD/GA/wiring docs, device selection, heat-load, testing, and FAT.
BMS & Security
BMS training focuses on HVAC/lighting/utilities automation; CCTV & security covers design, storage, networking, and analytics.
IIoT
The Industrial IoT diploma spans sensors-to-dashboard pipelines: MQTT/OPC UA, gateways, historians, alerts/KPIs, and predictive maintenance basics.
