IPCS BLOG

Industrial Thermography
Posted On: 15 July 2015 | By:IPCS

Infrared thermography (IRT), thermal imaging, and thermal video are examples of infrared imaging science. Thermographic cameras usually detect radiation in the long-infrared range of the electromagnetic spectrum (roughly 9,000–14,000 nanometers or 9–14 µm) and produce images of that radiation, called thermograms. Since infrared radiation is emitted by all objects with a temperature above absolute zero according to the black body radiation law, thermography makes it possible to see ones environment with or without visible illumination. The amount of radiation emitted by an object increases with temperature; therefore, thermography allows one to see variations in temperature. When viewed through a thermal imaging camera, warm objects stand out well against cooler backgrounds; humans and other warm-blooded animals become easily visible against the environment, day or night. As a result, thermography is particularly useful to the military and other users of surveillance cameras. Some physiological changes in human beings and other warm-blooded animals can also be monitored with thermal imaging during clinical diagnostics. Thermography is often used for breast screening, allergy detection, and in veterinary use. Government and airport personnel used thermography to detect suspected swine flu cases during the 2009 pandemic. Thermal imaging camera and screen. Thermal imaging can detect elevated body temperature, one of the signs of the virus H1N1 (Swine influenza). Thermography has a long history, although its use has increased dramatically with the commercial and industrial applications of the past fifty years. Firefighters use thermography to see through smoke, to find persons, and to localize the base of a fire. Maintenance technicians use thermography to locate overheating joints and sections of power lines, which are a sign of impending failure. Building construction technicians can see thermal signatures that indicate heat leaks in faulty thermal insulation and can use the results to improve the efficiency of heating and air-conditioning units. The appearance and operation of a modern thermographic camera is often similar to a camcorder. Often the live thermogram reveals temperature variations so clearly that a photograph is not necessary for analysis. A recording module is therefore not always built-in. Non-specialized CCD and CMOS sensors have most of their spectral sensitivity in the visible light wavelength range. However by utilizing the "trailing" area of their spectral sensitivity, namely the part of the infrared spectrum called near-infrared (NIR), and by using off-the-shelf CCTV camera it is possible under certain circumstances to obtain true thermal images of objects with temperatures at about 280 °C and higher. Specialized thermal imaging cameras use focal plane arrays (FPAs) that respond to longer wavelengths (mid- and long-wavelength infrared). The most common types are InSb, InGaAs, HgCdTe and QWIP FPA. The newest technologies use low-cost, uncooled microbolometers as FPA sensors. Their resolution is considerably lower than that of optical cameras, mostly 160x120 or 320x240 pixels, up to 640x512 for the most expensive models. Thermal imaging cameras are much more expensive than their visible-spectrum counterparts, and higher-end models are often export-restricted due to the military uses for this technology. Older bolometers or more sensitive models such as InSb require cryogenic cooling, usually by a miniature Stirling cycle refrigerator or liquid nitrogen.


Tags:  

POST YOUR COMMENT

SEARCH HERE

ARCHIVES

Automation Training Cochin

Shenoy's Junction, MG Road
Ernakulam, Kerala, India
0484 404 6664,
mail@ipcsautomation.com


View Larger Map

Automation Training Coimbatore

Ram Nagar, Gandhipuram
Coimbatore, TN, India
04224223664, 9585526664
cbr@ipcsautomation.com


View Larger Map

Automation Training Calicut

Railway Link Road,
Calicut, Kerala, India
0495 - 401 6664, 3236034,
info@ipcsautomation.com


View Larger Map

Automation Training Mumbai

Sector 15, Vashi,
Navi Mumbai, India
+91 9539 09 6664
mumbai@ipcsautomation.com


View Larger Map

Automation Training Qatar

Wadi Al Raha Street,
Nuaija (43), Doha - Qatar
00974 66526664, 30012909
qatar@ipcsautomation.com


View Larger Map

Automation Training Trivandrum

Rema Plaza, S.S.kovil Road,
Thampanoor, Trivandrum, Kerala.
+91 99464 46664
trivandrum@ipcsautomation.com

Automation Training Chennai

SHEFFIELD TOWERS ,4TH STREET,
VILLIVAKKAM,CHENNAI-600 049
044-43530345​
chennai@ipcsautomation.com

Automation Training Dubai

Suntech Tower, Office # 205
Dubai Silicon Oasis, Dubai, U.A.E
+971-50-3831877, +971-50-3831866
dubai@ipcsautomation.com

Automation Training Saudi Arabia

Al-olaya street, P.O.Box: 15425.
Riyadh 11444, Saudi Arabia,
+966 554385530
e-mail: riyadh@ipcsautomation.com